Olympic Stadium Map for Minecraft

Minecraft Maps — February 24, 2014, 10:07 AM - 918 views

The design of the stadium is defined by the four arches that span the entire stadium. These are designed to partially carry the load of the second tier seating, and to support the glazing (as there is both an enclosure outside of the seating, and the glass canopy). The lighting is also another key element in the design. The facade of the outer arch lights up the contours of the stadium, while the inner arches act as the stadium lighting. All of these lights are controlled by redstone from three switches (two for the exterior lights, one for the stadium lights) from the small building opposite the Olympic cauldron.

If you are wondering about the excessive circuitry in there, that was done in an effort to slow down the pulsing lights on the exterior arch. Even though it was slowed down to nearly a minute between pulses, my computer could not handle it, so i just left the lights on, which seems to avoid any issues. Feel free to edit the circuitry however you please, but be aware that it can slow down your computer significantly. There is a daylight kill switch on both lights, and manual kill switch to shut down the circuitry in the building. should you run into similar issues.

I used the Bolshoy Ice Dome in Sochi, a render of the Sochi Olympic stadium, and the proposed design for the 2020 Tokyo Olympics as references, which were designed by SIC Mostovic, a collaboration between Populous and Buro Happold, and Zaha Hadid Architects respectively, and early on, the 1964 Tokyo stadium, designed by Mitsuo Katayama, had some influence as well.

Redstone Controls:

  • – Switch for outer arch lights
  • – Switch for stadium lights
  • – daylight kill switches to exterior and stadium lights (automatic)
  • – manual kill switch for pulse circuit for outer arch lights (must connect redstone for the circuit to work, two are missing right near the center, as the loop circuit is not necessary to just turn on the lighting for the exterior arch)
  • – button for fireworks (connected to 48 dispensers)
  • – kill switch for fireworks

Minecraft Olympic Stadium Map Screenshots:

Minecraft Olympic Stadium Map (1)

Minecraft Olympic Stadium Map (5)

Minecraft Olympic Stadium Map (4)

Minecraft Olympic Stadium Map (3)

Minecraft Olympic Stadium Map (2)

Using High Rossferry City Texture Pack

How to Install Minecraft Olympic Stadium Map:

  • For World save file
  1. Download Minecraft Olympic Stadium Map
  2. On windows this can be easily done by opening up the command line, accessible by Windows+R and then typing “%appdata%/.minecraft/saves/” into the command line. (If you’re on a Mac, your save files are in: ~/Library/Application Support/minecraft/saves/)
  3. This will open the saves folder where all the your worlds are stored. Once in that folder all you have to do is paste your downloaded save in
  4. Drag your downloader (after unzip) in the zip folderMap into saves folder
  5. Close all windows and open Minecraft
  6. Select map and play.
  • For schematic file
  1. Download schematic file
  2. You have MCEdit – Minecraft Woldr Editer installed
  3. Open the MCEdit and select the world from the list that you would like to add the schematic to (If none are on the list you will have to click the “Open a Level..” text and find it in the file browser.)
  4. You need to click the import button (little red crane) on the bottom right, find the schematic in the file browser and click open
  5. After you place it in a good spot, click the import button to complete the operation.

Developer: jduartemiller

Download Minecraft Olympic Stadium Map:

Olympic Stadium Map.zip (Mirror)

MCEdit Schematic: olympicstadium.zip



0 comment

New comment


Nice Theme

Nice Theme
WordPress Themes